IIASA RepositoryModeling retained water content in measured aerosol massM.KajinoauthorW.WiniwarterauthorH.UedaauthorThe contribution of liquid water to measured aerosol mass was estimated using a numerical approach applied to European measurement data. Aerosol mass is determined after conditioning of the filter under dry conditions for a predefined period according to a standard procedure. After this procedure, water in aerosols is assumed to be at very low concentrations. However, we find indications that the equilibrium of aerosol is not fully established and water is not completely evaporated after the drying operation. To estimate the aerosol humidity, a mass transfer coefficient was derived for evaporation from the filters. Data from a few available measurements of aerosol humidity were applied with a numerical kinetic approach, using thermodynamic equilibrium as boundary conditions. The calculated coefficient ranged from 10-5 to 10-4 (s-1), with an average value of 3.2×10-5 s-1. Using this average value the expected water content of aerosol was assessed for sites in Austria. Most of the samples are expected to still contain 1-5% water. In winter, the air is humid and the concentration of inorganic hygroscopic compounds is also high, resulting in high uptake of water from the air. Under such conditions, approximately 70% of unidentified non-carbonaceous components, or about 10% of PM2.5 mass, were considered to be water.2006-09ElsevierArticle

For work being deposited by its own author: In self-archiving this collection of files and associated bibliographic metadata, I grant IIASA Repository the right to store them and to make them permanently available publicly for free on-line. I declare that this material is my own intellectual property and I understand that IIASA Repository does not assume any responsibility if there is any breach of copyright in distributing these files or metadata. (All authors are urged to prominently assert their copyright on the title page of their work.)

For work being deposited by someone other than its author: I hereby declare that the collection of files and associated bibliographic metadata that I am archiving at IIASA Repository) is in the public domain. If this is not the case, I accept full responsibility for any breach of copyright that distributing these files or metadata may entail.

Clicking on the deposit button indicates your agreement to these terms.